FBO Notice Date 12/13/18
BIDS Reference Number 545
Document Type: Combined Synopsis
Pipe, Tubing, Hose & Fittings

Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, 43216-5000

47 -- Pipe Fittings SOL SPMYM3-19-Q-7011 DUE 121918Donna J. Quill, Purchase Agent, Phone 207-438-2386, Fax 207-438-1251, Email donna.j.quill@navy.mil

(SPMYM3-19-Q-7008 Cancelled) replaced by SPMYM3-19-Q-7011

Pipe Fittings JMLs 82844021-5

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to FEDBIZOPPS. The RFQ number is SPMYM3-19-Q-7011. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-101 and DFARS ChangeNotice 20180928. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full textat these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/html/current/252201.htm . The NAICS code is 332919 and theSmall Business Standard is 750 Employees. This requirement is a 100% Small Business Set-Aside.

Requirement is "All or None"

Note **** Award MAY be based on delivery due to urgency.

Place of Manufacture / Country of Origin Required.

Evaluation criteria is Lowest Price Technically Acceptable (LPTA) however, SPRS will be used to determine vendor responsibility.

Potential contractors will be screened for responsibility in accordance with FAR 9.104.

Quotes must be faxed to 207-438-1251 or e-mailed to donna.j.quill@navy.mil

A reverse auction may be held.

The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

MATERIAL INFORMATION

ITEM DESCRIPTION U/I QTY UNIT PRICE TOTAL PRICE

0001 2 - 1 / 2 " NPS Butt Weld Tee QTY 2 each ______ _______

2 - 1/ 2 " NPSTee, 700 PSI, Seamless, Butt Weld, MIL-DTL-24202 (1). Material: CUNI 70/30 Alloy C71500.

Ref 82844021

0002 2 - 1 / 2 x 2" x 2" NPS Butt Weld Tee QTY 1 each ______

2 - 1 / 2 " x 2" x 2" NPS Tee, 700 PSI, Seamless, Butt Weld, MIL-DTL-24202 (1). Material: CUNI70/30 Alloy C71500.

Ref 82844022

0003 2 - 1 / 2 " NPS Butt Weld Tee QTY 2 each ______ _______

2 - 1 / 2 " NPS Tee, 700 PSI, Seamless. Butt Weld, MIL-DTL-24202 (1). Material: CUNI 70/30 Alloy C71500.

Ref 82844023

0004 2 - 1 / 2 " x 2 - 1 / 2 " x 1 - 1 / 2 " NPS Butt Weld Tee QTY 1 each ______

2 - 1 / 2 " x 2 - 1 / 2 " x 1 - 1 / 2 " NPS Tee, 700 PSI, Seamless. Butt Weld, MIL-DTL-24202 (1). Material: CUNI 70/30 Alloy C71500.

Ref 82844024

0005 2 - 1 / 2 " NPS LR 90 degree Butt Weld Elbow QTY 1 each ______

2 - 1 / 2 " NPS 90 degree elbow, Long Radius, 700 PSI, Seamless, Butt Weld, MIL-DTL-24202 (1).Material: CUNI 70/30 Alloy C71500.

Ref 82844025

See Exhibit "A" Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).

See Exhibit "A" Seq A002: CDRL DI-MISC-80678 (Certification / Data Report).

52.204-7 System for Award Management

52.204-13, SAM Maintenance

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations- Representation

52.211-14, Notice of Priority Rating

52.211-15, Defense Priority And Allocation Requirements

52.211-17, Delivery of Excess Quantities

52.211-9014 Contractor Retention of Traceability Documentation

52.211-9020 Time of Delivery-Accelerated Delivery

52.212-1, Instructions to Offerors

52.212-3 Alt I Instructions to Offerors Evaluation Offeror Reps and Certs

52.212-4, Contract Terms and Conditions - Commercial Items

52.215-9023, Reverse Auction

52.219-9004 Small Business Program Representations

52.222-22 Previous Contracts & Compliance Reports

52.222-25 Affirmative Action Compliance

52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran - Reps and Certs

52.232-39, Unenforceability of Unauthorized Obligations

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution

52.242-15 Stop Work Order

52.243-1, Changes Fixed Price

52.246-1, Contractor Inspection Requirements

52.246-9039 Removal of Government Identification from Non Accepted Supplies

52.247-34, F.O.B-Destination

52.247-9012, Requirements for Treatment of Wood Packaging Material

52.252-1, Solicitation Provisions Incorporated by Reference

52.252-2, Clauses Incorporated by Reference

52.252-6, Authorized Deviations in Clauses

52.253-1, Computer Generated Forms

252.203-7002, Requirement to Inform Employees of Whistleblower Rights

252.204-7003. Control of Government Personnel Work Product

252.204-7008 DEV Compliance With Safeguarding Covered Defense Information Controls

252.223-7008 Prohibition of Hexavalent Chromium

252.225-7001 Buy American Act & Balance of Payments Program

252.225-7002 Qualifying Country Sources as Subcontractors

252.232-7010, Levies on Contract Payments

252.243-7001, Pricing of Contract Modifications

and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.204-10 Reporting Executive Compensation and First Tier Subcontract Awards, 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation, 52.209-6 Protecting the Government's Interest When Subcontracting with Debarred, Suspended, or Proposed for Debarment, 52.219-6 Notice of Total Small Business Set-Aside, 52.219-28 Post Award Small Business Program Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-36 Equal Opportunities for Workers w/Disabilities, 52.222-50 Combating Trafficking in Persons, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging Contractor Policies to Ban Test MessagingWhile Driving, 52.225-13 Restrictions on Certain Foreign Purchases.

Additional contract terms and conditions applicable to this procurement are:

DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials,

DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials

DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical InformationDeviation 2016 O0001)

DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors

DFARS 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability

DFARS 252.244-7000 Subcontracts for Commercial Items

DFARS 252.247-7023 Transportation of Supplies By Sea

Local Clauses:

YM3 A1: Additional Information

YM3 C500: Mercury Control (Supplies)

YM3 C524: Marking and Certification Requirements for Controlled Industrial Material (CIM)

YM3 C528: Specification Changes

YM3 D2: Marking of Shipments

YM3 D4: Preparation for Delivery (Commercially Packaged Items)

YM3 D8: Prohibited Packing Materials

YM3 E2: Inspection and Acceptance (Destination)

YM3 E504: Notice of Constructive Acceptance Period

YM3 F500: Consignment Instructions for Deliveries to Portsmouth Naval Shipyard

This announcement will close at 3:00 on December 19, 2018. The Point of Contact for this solicitation is Donna Quill who can be reached at 207-438-2386 or email donna.j.quill@navy.mil. [A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may submit a quote which shall be considered by the agency.

52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of price, technically acceptable low bids and past performance.

System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer - Manufacturer's Name Location and Business Size must be provided.

All quotes shall include price(s), FOB point, a pointof contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

CITE: https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM3-19-Q-7011/listing.html

SET-ASIDE: Total Small Business