FBO Notice Date 12/14/17
BIDS Reference Number 845
Document Type: Amendment
Weapons

Department of Veterans Affairs, VA Strategic Acquisition Center (Frederick), VA Strategic Acquisition Center (Frederick), 21703

10 -- VA LETC Maintenance and Repair Parts SOL 36C10X18Q0020COMBINE DUE 112917Kevin Hurst (kevin.hurst2@va.gov)Allen Smith (allen.smith3@va.gov)Page 14 of 15DESCRIPTION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation;quotes are being requested and a separate written solicitation will not be issued.

Solicitation Number: 36C10X18Q0020. This solicitation is issued as a request for quotation (RFQ) using simplified and commercial item procedures identified in FAR Parts 13.5 (Simplified Procedures for Certain Commercial Items) and 12 (Acquisition of Commercial Items).

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-94 and 2005-95 effective January 19, 2017 and the Veterans Affairs Acquisition Regulations (VAAR). The completetext of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil.

This requirement is a total (100%) set-aside for Service-Disabled Veteran-OwnedSmall Businesses (SDVOSBs). To be eligible to quote, vendors must be verified in the Veteran Information Pages (VIP) at https://www.vip.vetbiz.gov/Default.aspxand small under the applicable NAICS code-332994, SMALL ARMS, ORDNANCE, AND ORDNANCE ACCESSORIES MANUFACTURING (size standard of 1,000 employees) as determinable through the Quoter s SAM record.

Contractor shall deliver the following Brand Name parts through a base and fouroption years (if exercised):

Part #Item DescriptionAnnual QtyMAG570M4 Magpul Magazines w/Window40KIT-EXTRACTExtractor Kit for AR15/M16108448503M16 Firing Pin for AR15/M1610KIT-BOLTREBUILDBolt Rebuild Kit for AR15/M1610KIT-GAS RINGSBolt Gas Rings for AR15/M16 (3/PK)40KIT-LOWER-ARWindham Complete Lower Receiver Parts for AR1510KIT-BA14M4Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpost10C1295AR15 Magazine Safety Block (Yellow)40BA11HBFTWindham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twist5SPRING-30P229 Sig Sauer Guide Rod Springs20EXTRACTOR-1Extractor P Series (E29R-9-BSS-DAK-MGS-G)201202820-RExtractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)201202813Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)20

Description of requirements for the items to be acquired:See Price Schedule for requirements.

Dates and place of delivery and acceptance:

Ship To and Mark For:

TBD

Delivery is 90 days after receipt of order (ARO) and exercise of Option(s) (if exercised).

The provision at 52.212-1, Instructions to Offerors -- Commercial Items appliesto this acquisition. Addenda to the provision are as follows:

INSTRUCTIONS TO QUOTERS

Submission of quote:Submit your company s quote via email to the Contract Specialist (Kevin.Hurst2@va.gov) and Contracting Officer (Allen.smith3@va.gov) prior to the deadline below. You may submit more than one quote. If you do, the Government will evaluate each separately.

Submission deadline:The Government must receive your quote via email by 12:00PM ET on December 29, 2017. The Government will not consider any quote that it receives after the deadline unless it receives it before issuing an order and considering it will not delay the purchase. The Government email system will not accept file sizes that exceed 5MB. It is the contractor s responsibility to submit all parts of its quote no later than the date and time specified in the RFQ.

In case of an emergency that delays operations and makes submission or receipt of your quote impossible, the Government may extend the deadline by one working day at its sole discretion.

Questions:Submit any questions electronically to the email addresses above on or before 4:00PM ET on December 19, 2017. Questions submitted after this date and time may not receive a response.

Terms and content of your quote:Your quote must be based on the terms of this RFQ. The Government may reject any quote that is not based on these terms in every respect.

Quoters are hereby advised that any quoter-imposed terms and conditions and/or assumptions which deviate from the Government s material terms and conditions established by the solicitation, may render the offeror s quote unacceptable, and thus ineligible for award.

Your quote must contain all of the information described below.

Socioeconomic Status:To be eligible to quote, your firm must be a VIP Verified SDVOSB at time of quote submission and at time of award, and small under the NAICS 332994 (discernable from your SAM Representations and Certifications).

Issuance of an award:Your quote should contain your best terms. The Contracting Officer may reject any or all quotes. After the evaluation of quotes, the Contracting Officer may negotiate final terms with one or more quoters of the Government s choice before issuing an order. The Contracting Officer will not negotiate with any quoters other than those of the Government s choice and will NOT use the formal source selection procedures described in FAR Part 15.

The Contracting Officer intends to issue an order to the responsible quoter with the lowest price technically acceptable. The Government may issue an order forless than the quantity on which your quote is based, at the quoted unit price, unless your quote identifies that you will not accept an order on that basis.

Any award resulting from this solicitation will be issued on a Standard Form 1449.

Information to be submitted:Place the following information on the first (non-cover)page of your quote:(1) RFQ number 36C10X18Q0020;(2) Your company name, address, DUNS number and telephone number;(3) Your fixed CLIN prices (and any discount terms) by completing unit and total price of the following (must price all CLINs for Base and Options):

BASE PERIOD (01/15/18 - 01/14/19)CLINDESCRIPTIONQTYUNITUNIT PRICETOTAL PRICE0001Magpul M4 Magazines w/WindowPart # MAG57040EA$___________$___________0002Windham Extractor Kit for AR15/m16Part # KIT-EXTRACT10EA$___________$___________0003Windham M16 Firing Pin for AR15/M16Part #844850310EA$___________$___________0004Windham Bolt Rebuild Kit for AR15/M16Part # KIT-BOLTREBUILD10EA$___________$___________0005Windham Bolt Gas Rings for AR15/M16 (3/PK)Part # KIT-GAS RINGS40EA$___________$___________0006Windham Complete Lower Receiver Parts for AR15Part # KIT-LOWER-AR10EA$___________$___________0007Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpostPart # KIT-BA14M410EA$___________$___________0008Windham AR15 Magazine Safety Block (Yellow)Part # C129540EA$___________$___________0009Windham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twistPart # BA11HBFT5EA$___________$___________0010Sig Sauer P229 Guide Rod SpringsPart # SPRING-3020EA$___________$___________0011Sig Sauer Extractor P Series (E29R-9-BSS-DAK-MGS-G)Part # EXTRACTOR-120EA$___________$___________0012Sig Sauer Extractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)Part #1202820-R20EA$___________$___________0013Sig Sauer Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)Part #120281320EA$___________$___________Base Period Total

$_________

OPTION PERIOD ONE (01/15/19 - 01/14/20)CLINDESCRIPTIONQTYUNITUNIT PRICETOTAL PRICE1001Magpul M4 Magazines w/WindowPart # MAG57040EA$___________$___________1002Windham Extractor Kit for AR15/m16Part # KIT-EXTRACT10EA$___________$___________1003Windham M16 Firing Pin for AR15/M16Part #844850310EA$___________$___________1004Windham Bolt Rebuild Kit for AR15/M16Part # KIT-BOLTREBUILD10EA$___________$___________1005Windham Bolt Gas Rings for AR15/M16 (3/PK)Part # KIT-GAS RINGS40EA$___________$___________1006Windham Complete Lower Receiver Parts for AR15Part # KIT-LOWER-AR10EA$___________$___________1007Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpostPart # KIT-BA14M410EA$___________$___________1008Windham AR15 Magazine Safety Block (Yellow)Part # C129540EA$___________$___________1009Windham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twistPart # BA11HBFT5EA$___________$___________1010Sig Sauer P229 Guide Rod SpringsPart # SPRING-3020EA$___________$___________1011Sig Sauer Extractor P Series (E29R-9-BSS-DAK-MGS-G)Part # EXTRACTOR-120EA$___________$___________1012Sig Sauer Extractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)Part #1202820-R20EA$___________$___________1013Sig Sauer Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)Part #120281320EA$___________$___________

Option Period One Total

$__________

OPTION PERIOD TWO (01/15/20 - 01/14/21)CLINDESCRIPTIONQTYUNITUNIT PRICETOTAL PRICE2001Magpul M4 Magazines w/WindowPart # MAG57040EA$___________$___________2002Windham Extractor Kit for AR15/m16Part # KIT-EXTRACT10EA$___________$___________2003Windham M16 Firing Pin for AR15/M16Part #844850310EA$___________$___________2004Windham Bolt Rebuild Kit for AR15/M16Part # KIT-BOLTREBUILD10EA$___________$___________2005Windham Bolt Gas Rings for AR15/M16 (3/PK)Part # KIT-GAS RINGS40EA$___________$___________2006Windham Complete Lower Receiver Parts for AR15Part # KIT-LOWER-AR10EA$___________$___________2007Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpostPart # KIT-BA14M410EA$___________$___________2008Windham AR15 Magazine Safety Block (Yellow)Part # C129540EA$___________$___________2009Windham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twistPart # BA11HBFT5EA$___________$___________2010Sig Sauer P229 Guide Rod SpringsPart # SPRING-3020EA$___________$___________2011Sig Sauer Extractor P Series (E29R-9-BSS-DAK-MGS-G)Part # EXTRACTOR-120EA$___________$___________2012Sig Sauer Extractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)Part #1202820-R20EA$___________$___________2013Sig Sauer Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)Part #120281320EA$___________$___________

Option Period Two Total

$___________

OPTION PERIOD THREE (01/15/21 - 01/14/22)CLINDESCRIPTIONQTYUNITUNIT PRICETOTAL PRICE3001Magpul M4 Magazines w/WindowPart # MAG57040EA$___________$___________3002Windham Extractor Kit for AR15/m16Part # KIT-EXTRACT10EA$___________$___________3003Windham M16 Firing Pin for AR15/M16Part #844850310EA$___________$___________3004Windham Bolt Rebuild Kit for AR15/M16Part # KIT-BOLTREBUILD10EA$___________$___________3005Windham Bolt Gas Rings for AR15/M16 (3/PK)Part # KIT-GAS RINGS40EA$___________$___________3006Windham Complete Lower Receiver Parts for AR15Part # KIT-LOWER-AR10EA$___________$___________3007Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpostPart # KIT-BA14M410EA$___________$___________3008Windham AR15 Magazine Safety Block (Yellow)Part # C129540EA$___________$___________3009Windham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twistPart # BA11HBFT5EA$___________$___________3010Sig Sauer P229 Guide Rod SpringsPart # SPRING-3020EA$___________$___________3011Sig Sauer Extractor P Series (E29R-9-BSS-DAK-MGS-G)Part # EXTRACTOR-120EA$___________$___________3012Sig Sauer Extractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)Part #1202820-R20EA$___________$___________3013Sig Sauer Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)Part #120281320EA$___________$___________

Option Period Three Total

$___________

OPTION PERIOD FOUR (01/15/22 - 01/14/23)CLINDESCRIPTIONQTYUNITUNIT PRICETOTAL PRICE4001Magpul M4 Magazines w/WindowPart # MAG57040EA$___________$___________4002Windham Extractor Kit for AR15/m16Part # KIT-EXTRACT10EA$___________$___________4003Windham M16 Firing Pin for AR15/M16Part #844850310EA$___________$___________4004Windham Bolt Rebuild Kit for AR15/M16Part # KIT-BOLTREBUILD10EA$___________$___________4005Windham Bolt Gas Rings for AR15/M16 (3/PK)Part # KIT-GAS RINGS40EA$___________$___________4006Windham Complete Lower Receiver Parts for AR15Part # KIT-LOWER-AR10EA$___________$___________4007Windham Weaponry 14.5 M4 Barrell Kit for AR15/M16 1:9 Twist/A frame front sightpostPart # KIT-BA14M410EA$___________$___________4008Windham AR15 Magazine Safety Block (Yellow)Part # C129540EA$___________$___________4009Windham Weaponry 11.5 Heavy Barrel Sub Assembly w/ Picatinny Rail Sight /1:9 twistPart # BA11HBFT5EA$___________$___________4010Sig Sauer P229 Guide Rod SpringsPart # SPRING-3020EA$___________$___________4011Sig Sauer Extractor P Series (E29R-9-BSS-DAK-MGS-G)Part # EXTRACTOR-120EA$___________$___________4012Sig Sauer Extractor Pin, P Series (E29R-9-BSS-DAK-MGS-G)Part #1202820-R20EA$___________$___________4013Sig Sauer Extractor Spring, P Series (E29R-9-BSS-DAK-MGS-G)Part #120281320EA$___________$___________

Option Period Two Total$___________

Grand Total (Base + Options)

$___________

(4) Acknowledgement of any amendments to this RFQ; and(5) A statement that you assent to all terms of this RFQ.

Beginning on the next page of your quote, provide the following information:

DELIVERY APPROACH: Statement confirming ability to deliver Brand Name Only items identified above and in Price Schedule.

System for Award Management (SAM): You must be registered in SAM at time of quote submission and must remain registered throughout performance until final payment. Go to https://www.acquisition.gov for information on SAM registration and annual confirmation.DUNS Number (Data Universal Numbering System Number):Place the annotation DUNS or DUNS+4 next to your name and address on the first page of your quote as required above. If you do not have a DUNS number, contact Dun and Bradstreet to obtain one. If you are located within the United States, you may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. If you are located outside the United States, you must contact the local Dun and Bradstreet office for a DUNS number. TellDun and Bradstreet that you are a quoter for a Government contract when contacting the local Dun and Bradstreet office. The DUNS+4 is the DUNS number plus a 4-character suffix that you may use at your discretion to establish additional SAMrecords for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for your company.

Additional Provision(s):

The following additional Provisions are incorporated by reference:

VAAR 852.270-1 REPRESENTATIVES OF CONTRACTING OFFICERS (JAN 2008)52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS REPRESENTATION (JAN 2017)52.203-98 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS REPRESENTATION (DEVIATION) (FEB 2015)52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JUL 2013)52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS COMMERCIAL ITEMS (JAN 2017)52.225-18 PLACE OF MANUFACTURE (MAR 2015)SERVICE OF PROTEST (SEP 2006)VAAR 852.233-70 PROTEST CONTENT/ALTERNATIVE DISPUTE RESOLUTION (JAN 2008)VAAR 852.273-74 AWARD WITHOUT EXCHANGES (JAN 2003)

***********************END OF ADDENDA TO 52.212-1 **********************

The evaluation will be conducted using the procedures in FAR 13.106-2 and the provision at FAR 52.212-2.

The provision at 52.212-2, Evaluation -- Commercial Items applies to this RFQ. Paragraph (a) of this provision is as follows:

The Government intends to award a contract resulting from this solicitation to the responsible VIP Verified Quoter whose quote conforming to the solicitation will be most advantageous to the Government. The Government has determined that best value will be achieved by using a Lowest Priced Technically Acceptable approach to determine best value.

The following factors shall be used to evaluate quotes:

A. Delivery Approach (Confirmation of Items);B. Price**********************END OF 52.212-2, Paragraph (a) *********************

Additional evaluation information:

Delivery Approach- Government will review delivery approach to determine whether vendor can deliver ammunition meets the SOW requirements. Note that there are Brand Name Only requirements.

Price- Price will not be evaluated adjectivally or assigned a score. Price willbe evaluated to determine whether it is fair and reasonable. For a price to be reasonable, it must represent a price to the Government that a prudent person would pay when consideration is given to prices in the market. The Government expects that price reasonableness will be established through adequate price competition, but it may also determine price reasonableness through price analysis techniques as described in FAR 13.106-3. The Government will evaluate quotes, by adding all established pricing elements (inclusive of options) to determine the final/total price.

Note that formal evaluation plans and establishing a competitive range, conducting discussions, and scoring quotations or offers are not required. The Contracting Officer may conduct comparative evaluations of quotes.

Although Past Performance is not evaluated as a separate evaluation element, the Government will consider past performance when performing its responsibility determination of the apparent awardee.

Quoters are advised to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its quote ifit does not wish to have the Government rely on its Representations and Certifications in SAM. If submitting Reps and Certs, Quoter should submit a separate volume from the information requested above.

The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. Addenda to the clause are as follows:

Paragraph 52.212-4(g) is supplemented with the following Order Administration Data (fill-ins to be completed at time of award):

***ORDER ADMINISTRATION DATA***(continuation from Standard Form 1449, block 18A.)

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR: __________________ __________________ __________________

DUNS: ____________ TIN: ______________ CAGE: ____________

b. GOVERNMENT: Contracting Officer 36C10X Strategic Acquisition Center - FrederickDepartment of Veterans Affairs321 Ballenger Center Drive, Suite 125Frederick MD 21703

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X]52.232-33, Payment by Electronic Funds Transfer System For Award Management, or [ ]52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly [ ] b. Semi-Annually [ ] c. Other [X] Following delivery and acceptance by the COR.

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

5. INVOICING INSTRUCTIONS

*** The IFCAP Purchase Order number: [TBD] MUST be included on all invoices.*** The Contract/Order number: [ ] MUST be included on allinvoices.

******************************************************************************TUNGSTEN (fka OB10) ELECTRONIC INVOICE SUBMISSIONFSC e-INVOICE PROGRAM THRU AUSTIN PORTALFSC MANDATORY ELECTRONIC INVOICE SUBMISSION FOR AUSTIN PAYMENTS

Vendor Electronic Invoice Submission Methods:Fax, email and scanned documents are not acceptable forms of submission for payment requests. Electronic form means an automated system transmitting information electronically according to the accepted data transmissions below.

VA s Electronic Invoice Presentment and Payment System The Financial ServicesCenter (FSC) in Austin, TX uses a third-party contractor, Tungsten, to transition vendors from paper to electronic invoice submission. Please go to this website: http://www.tungsten-network.com/US/en/veterans-affairs/ to begin submitting electronic invoices, free of charge.A system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) chartered by the American National Standards Institute (ANSI). The X12 EDI Web site is http://www.x12.org.

Vendor e-invoice Set-up information:Please contact Tungsten at the phone number or email address listed below to begin submitting your electronic invoices to the VA Financial Services Center in Austin, TX for payment processing. If you have questions about the payment statusof a properly submitted invoice, the e-invoicing program, or Tungsten, please contact the FSC at the phone number or email address listed below.

Tungsten e-Invoice setup information: 1-877-489-6135Tungsten e-Invoice email: VA.Registration@tungsten-network.comVA TUNGSTEN Number: AAA544240062FSC e-Invoice contact information: 1-877-353-9791FSC e-Invoice email: vafsccshd@va.govhttp://www.fsc.va.gov/einvoice.asp

COMMUNICATIONS:

https://www.federalregister.gov/articles/2012/11/27/2012-28612/va-acquisition-regulation-electronic-submission-of-payment-requestshttp://fcw.com/articles/2012/11/27/va-epayments.aspx?s=fcwdaily

6. LIMITATIONS ON SUBCONTRACTING- MONITORING AND COMPLIANCE: This solicitation includes VA Acquisition Regulation (VAAR) 852.219-10, VA Notice of Total Service-Disabled Veteran-Owned Small Business Set- Aside (DEVIATION) and Federal Acquisition Regulation (FAR) 52.219-14, Limitations on Subcontracting. Accordingly, any task order resulting from this solicitation will include these clauses. The contractor is advised in performing contract administration functions, the CO may use the services of a support contractor(s) retained by VA to assist in assessing the contractor's compliance with the limitations on subcontracting or percentage of work performance requirements specified in the clause. To that end, the support contractor(s) may require access to contractor's offices where the contractor's business records or other proprietary data are retained and to review suchbusiness records regarding the contractor's compliance with this requirement. All support contractors conducting this review on behalf of VA will be required to sign an Information Protection and Non-Disclosure and Disclosure of Conflictsof Interest Agreement to ensure the contractor's business records or other proprietary data reviewed or obtained in the course of assisting the CO in assessing the contractor for compliance are protected to ensure information or data is not improperly disclosed or other impropriety occurs. Furthermore, if VA determines any services the support contractor(s) will perform in assessing compliance are advisory and assistance services as defined in FAR 2.101, Definitions, the support contractor(s) must also enter into an agreement with the contractor to protect proprietary information as required by FAR 9.505-4, Obtaining access to proprietary information, paragraph (b). The contractor is required to cooperate fully and make available any records as may be required to enable the CO to assess the contractor's compliance with the limitations on subcontracting or percentageof work performance requirement.

***********************END OF ADDENDA TO 52.212-4 **********************

The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition.The following are applicable to the acquisition:

52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402)52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note)52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (OCT 2015) (31 U.S.C. 6101 note)52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313)52.217-9 Option to Extend the Term of the Contract52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f)52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2))52.222 19, Child Labor Cooperation with Authorities and Remedies (OCT 2016) (E.O. 13126)52.222-21, Prohibition of Segregated Facilities (APR 2015)52.222 26, Equal Opportunity (SEP 2016) (E.O. 11246)52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212)52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793)52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212)52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496)52.222-50, Combating Trafficking in Persons (MAR 2015) (22 U.S.C. chapter 78 and E.O. 13627)52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513)52.225-1, Buy American Supplies (MAY 2014) (41 U.S.C. chapter 83)52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O. s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury)52.232-33, Payment by Electronic Funds Transfer System for Award Management (Jul 2013) (31 U.S.C. 3332)

The following additional Clauses are incorporated by reference:52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (JAN 2017)52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTSOR STATEMENTS (JAN 2017)52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)VAAR 852.203-70 Commercial Advertising (JAN 2008)VAAR 852.219-10 VA NOTICE OF NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2016) (DEVIATION)VAAR 852.232-72 Electronic submission of payment requests (NOV 2012)Additional contract requirement(s) or terms and conditions: None

Quotes are due prior to 12:00PM ET on December 29, 2017.

For information regarding the solicitation, please contact Mr. Kevin Hurst at kevin.hurst@va.gov or via phone at (240) 215-0785 or Mr. Allen Smith at allen.smith3@va.gov or via phone at (240) 215-1681.

CITE: https://www.fbo.gov/spg/VA/AFMLOVASS/VASSMD/36C10X18Q0020/listing.html

SET-ASIDE: Service-Disabled Veteran-Owned Small Business